 |
Marine Electrical & Electronic Products
For more information Click Here |
| |
32 Way Cruiser Series Circuit Breaker Panel
|
|
Features
The Cruiser series of panels feature a mimic panel for quick ID of circuits on and a blank space for additional meters such as a tank gauge.
Model : NC32YA(12v)
Size (inches): L 15 X W 13.9 X D 2.5 |
|
16 Way Panel
|
|
Features
* Panels are supplied standard with 30 Amp Double pole mains CBs on shore power .
* 1 and 2 20 Amp double pole CBs on ship Power and parallel.
* An upgrade option is available with 50 Amp CBs on shore power
*1 and 2, and 60 or 80 Amp CB on ships Power.
* Analogue meters
* Model : 900-AC10A-220v
* Size (inches) : L 15 x W 9.75 X D 2.5 |
|
8 Way Circuit Breaker Panel
|
|
Features
* Marine Grade powder coated aluminum
*Airpax circuit breaker
*Stylish Contour Design facial
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards .
Model : 901v (12v)
Size (inches): L 7.9 X W 5 X D 2.5 |
|
4 Way Circuit Breaker Panel
|
|
Features
* Marine Grade powder coated aluminum
*Airpax circuit breaker
*Stylish Contour Design facial
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards .
Model : 900 (12v)
Size (inches): L 4.5 X W 5 X D 2.5 |
|
16 Way AC Control Panel with Selector
|
|
Features
* All AC Panels available in 110v 60Hz or 230v 50Hz Options .
* Models with digital meter shows Volts.- Amps and Frequency for specs.
* all digital and analog panels supplied with transducers.
* Reverse polarity indicator.
* Double Pole mains input CBs with slide lockout.
Model : 900-AC4D (230v)
Size (inches): L 7.9 X W 13.9 X D 2.5
Meter : Digital |
|
8 Way AC Control Panel with Selector
|
|
Features
* All AC Panels available in 110v 60Hz or 230v 50Hz Options .
* Models with digital meter shows Volts.- Amps and Frequency for specs.
* all digital and analog panels supplied with transducers.
* Reverse polarity indicator.
* Double Pole mains input CBs with slide lockout.
Model : 900-AC2AH (230v)
Size (inches): L 7.9 X W 9.75 X D 2.5
Meter : Analogl |
|
8 Way Circuit Breaker Panel
|
|
Features
* Marine Grade powder coated aluminum
*Airpax circuit breaker
*Stylish Contour Design facial
* Green LED backlit labels
* Red LED indicates systems on
* Panels meet ABYC standards .
Model : 901H (12v)
Size (inches): L 4.5 X W 9.75 X D 2.5 |
|
Sprayproof Switch Panels (CMP-5WPS)
|
|
Features
• Molded gasket incorporates fastening covers
• Switches clip easily into rear of panel and can be removed to replace with different function switches eg. on/on, on/off/on, off/(on) and (on)off(on)
• Mini fuses accessible from front of panel with removable cartridge
• Custom designed toggle cover with unique sealing feature
Model : CMP-5WPS
DIM : 3.75 x 4.25in , Switches : 5 |
|
Battery Switches
|
Panel Mount Selector Battery Switch
|
|
Features
* Continuous Rating: 275 Amps DC
* Intermittent Rating: 455 Amps DC
* Cranking Rating: 1250 Amps DC
* Voltage Rating: 48V DC
* Operation: On/Off
* Dimensions (2.75 x 2.75 x 3h inches)
Model: 701 - PM |
|
Countor Battery Master Switch
|
|
Features
* Continuous Rating: 275 Amps DC
* Intermittent Rating: 455 Amps DC
* Cranking Rating: 1250 Amps DC
* Voltage Rating: 48V DC
* Operation: On/Off
* Dimensions (2.75 x 2.75 x 3h inches)
Model: 701 |
|
Heavy Duty Selector Switch
|
|
Features
* Continuous Rating: 350 Amps DC between common and B1 or B2
* Continuous Rating: 500 Amps DC between common and B1 + B2
* Intermittent Rating: 500 Amps DC
* Cranking Rating: 1500 Amps DC
* Voltage Rating: 48V DC
* Operation: Selector - Battery 1-2-both off
* Dimensions (4 x 4 x 3.5h inches)
Model: 721 |
|
Mini Battery Selector Switch
|
|
Features
* Continuous Rating: 275 Amps DC
* Intermittent Rating: 455 Amps DC
* Cranking Rating: 1250 Amps DC
* Voltage Rating: 48V DC
* Operation: 1 - 2 - both - off
* Dimensions (2.75 x 2.75 x 3h inches)
Model : 701-S |
|
Easyfit Battery Switch
|
|
Features
* Continuous Rating: 275 Amps DC
* Intermittent Rating: 455 Amps DC
* Cranking Rating: 1250 Amps DC
* Voltage Rating: 48V DC
* Operation: On/Off
* Dimensions (2.75 x 2.75 x 3h inches)
Model: 700 |
|
Single Engine, Two Battery Banks
|
|
Features
When the switch is in position 1 it becomes the sensing battery for the VSR. Battery 2 which is in isolation will be charged via the VSR when the engine is running ensuring it is always fully charged. When the switch is in battery 2 position this becomes the sensing battery and battery 1 is charged via the VSR.The fact that there is always a fully charged battery in reserve is a huge safety factor.
* Dimensions (5.4H x 2.75W inches)
Model : 714-100A |
|
Dual Battery Charging Cluster
|
|
Features
Dual Battery charging clusters For use on charging systems under 125A. To be used in the fowling systems:
1 Single outboard dual battery bank.
2 Single alternator inboard engine dual battery bank.
Dimensions: 5.4W X 5.4H inches
Model : 716-SQ-100AVSR |
|
Twin outboard three battery banks
 |
|
Features
This system is designed for twin outboard installations using outboards without AUX outputs. It will allow the port engine to charge the port start battery and the house battery when the VSR is engaged (refer VSR specs for operation of VSR.) It will also allow the starboard engine to charge the starboard start battery and the house battery when the starboard VSR is engaged, giving a combined charge from two outboards into the house battery until the voltage regulators on both engines control the charge. It will also allow the house battery to be charged if steaming on one engine.
Model : 717-100A |
|
Motorized Battery Switch
|
|
Features
Continuous Rating: 300 Amps DC
Intermittent Rating: 500 Amps DC
Cranking Rating: 1250 Amps DC
Voltage Rating: 12 Volts DC
Operation: On/Off
Mounting: Recessed or Surface
Ignition Protection: Meets ABYC
Stud Size: 2 x 10mm (3/8”)
Tin plated copper studs and nuts Copper contacts
Model : 701-MD |
|
Motorized Battery Switch
|
|
Features
Continuous Rating: 300 Amps DC
Intermittent Rating: 500 Amps DC
Cranking Rating: 1250 Amps DC
Voltage Rating: 12 Volts DC
Operation: On/Off
Mounting: Recessed or Surface
Ignition Protection: Meets ABYC
Stud Size: 2 x 10mm (3/8”)
Tin plated copper studs and nuts Copper contacts
Model : 701-MDVS |
|
High Current Remote Operated VSS 500 Amps
|
|
Features
Continuous Rating: 500 Amps DC
Intermittent Rating: 700 Amps DC
Cranking Rating: 2500 Amps DC
Voltage Rating: 12 Volts DC
Operation: On/Off
Mounting: Recessed or Surface
Ignition Protection: Meets ABYC
Stud Size: 12mm (1/2”)
Tin plated copper studs and nuts Copper contacts
Model : 720-MDVS |
|
Voltage Sensitive Relays
|
|
Features
Same as the 710-125A with the added feature of dual
• Continuous current: 125 Amps
• Intermittent current: 150 Amps gnition Protected UL1107
Dimensions: 69L x 69W x 50H mm
Model : 710-125A DS VSR |
|
Contour Matrix DC Monitor
|
|
Features
Product Details:
The 600-DCM monitor offers a comprehensive range of functions to allow full monitoring of your batteries and charging systems. The 600-DCM monitors voltage on up to 3 battery banks, Amps for charge and discharge and capacity remaining in amp hours / percentage utilising peukerts exponent
Model : 600-DCM |
|
DC Systems Monitor (DCSM)
|
|
Features
• 8 Generic, user configurable inputs
Programmable high/low audio/visual alarms for volts, amps and tank levels
* Backlit keypad and dimmable screen
* Can be panel or surface mounted
Monitors:
* Charge/discharge amps for two banks
* Capacity remaining in A/h and %
* Battery condition
* Tank fluid level
* Circuit status
2.8” Colour QVGA LCD
Input voltage 8-32VDC
Dimensions
Width 38mm (1.50") x
High 40mm (1.57")
Backlit keypad |
|
Installation Cable Kit
|
|
Features
* 2 core screened cable in
* 2 lengths pre-terminated.
* 600-DCM-5M 5 m (16.45") cable
* 600-DCM-10M 10 m (32.9") cable
Model : 600-DCM-5M |
|
Installation Cable Kit
|
|
Features
450A / 50 mV shunt supplied with 80-600-0021-00 83L x 45W x 44H mm (3.25L x 2.8W x 2.75H in)
Model : LB-450-50 |
|
Wireless Remote Control
|
|
Features
Applications range from wireless control of BEP motorised master switches to control of pumps, motors and lighting via the BEP CZone™ system. Range of 80M (250ft). Two four-button remotes and one base receiver per |
|
Contour Matrix DC & Tank Level Monitor (600-DCTLM)
|
|
Features
Input Voltage 10-35 VDC
Power Consumption 45mA
Power Consumption 65mA
(Back Lighting On) |
|
Ultrasonic Tank Sender
|
|
Features
The NEW TSI Ultrasonic Tank Sender can be used on fuel ( petrol 0r diesel ), fresh water, grey water or black water tanks. One Part number suits all tanks !
The new TSI Ultrasonic Tank Sender can be used on fuel (petrol or diesel), fresh water, grey water or black water tanks. One part number suits all tanks.
The TSI is programmable for the following outputs, 240-33ohm, 10-180ohm and 0-5volt.
The TSI offers low profile and standard SAE 5 hole mounting pattern, allowing it to be retro fitted to practically all other sender brands
Standard off the shelf TS1 sender is set for 0-2M depth |
|