|
VRLA AGM Batteries
Valve-Regulated Lead-Acid (VRLA) Absorbed Glass Mat (AGM) batteries use special absorbed electrolyte technology that is superior to flooded lead-acid batteries. Fine, highly porous microfiber glass separators absorb the electrolyte, increasing efficiency by lowering internal resistance and boosting capacity. Lower internal resistance also means that the batteries can be recharged faster than conventional batteries, allowing the user to put them back into operation sooner. The valve-regulated AGM battery virtually eliminates gas emissions and acid leakage for longer and safer battery operation. AGM batteries are also completely maintenance-free.
Charge/Absorption/Equalize between 13.8 - 14.6 Volts @77ºF (25ºC).
Float/Standby between 13.5 + .01 @ 77ºF (25ºC).
|
*Temperature corrected charging required.*
ABSORBED GLASS MAT DUAL PURPOSE / DEEP CYCLE BATTERIES
• Maintenance-free construction :- Eliminates the need to add water
• Spillproof, valveregulated design :- Eliminates acid leaks and terminal corrosion
• Lower electrical resistance :- Provides higher discharge rates, quick starts
• Resists vibration damage :- Provides longer operation over time
• Faster charging rates :- Faster turnaround times
• Glass mat separators :- Spillproof and leakproof properties
• Safety relief valve system :- Safer operation and safer charging
• Combination terminals :- For easy hook-up
• Handles :- For easy installation
|
|
maximum cycle-life, superior vibration, resistance sealed construction, maintenance free
|
|
APPROX. WT
|
|
MAXIMUM OVERALL DIMENSIONS
|
|
Part No. |
CCA
@ 0°F |
REF.
MCA |
RES.
CAP |
20 AH
RATE |
APPROX.
WEIGHT
LBS
|
Lenght |
Width |
Height |
|
in |
mm |
in |
mm |
in |
mm |
|
12VOLT HEAVY-DUTY DEEP CYCLE ABSORBED GLASS MAT (AGM) VALVE REGULTED |
|
8A24M |
525 |
800 |
135 |
79 |
53 |
10-7/8 |
276 |
6-3/4 |
171 |
9-7/8 |
251 |
|
8A27M |
580 |
900 |
175 |
92 |
63 |
12-3/4 |
324 |
6-3/4 |
171 |
9-7/8 |
251 |
|
8A31DTM |
800 |
1000 |
200 |
105 |
69 |
12-15/16 |
329 |
6-3/4 |
171 |
9-3/8 |
238 |
|
8A4D |
1110 |
1420 |
380 |
198 |
131 |
20-3/4 |
527 |
8-1/2 |
216 |
10 |
254 |
|
|
|
AGM
UTV , ATV , Jet ski
Motorcycle
|
|
Part No. |
CCA
@ 0°F |
10 AH
RATING |
APPROX. WT |
LENGTH |
WIDTH |
HEIGHT |
|
LBS |
KG |
in |
mm |
in |
mm |
in |
mm |
|
ETX9 |
120 |
8 |
7.2 |
3.2 |
5 -7/8 |
150 |
3 -7/16 |
88 |
4-3/16 |
106 |
|
ETX14 |
220 |
12 |
12.0 |
5.4 |
5 -7/8 |
150 |
3 -7/16 |
88 |
5 -3/4 |
145 |
|
ETX16 |
325 |
19 |
17.0 |
7.7 |
6 -7/8 |
175 |
4 |
100 |
6 -1/8 |
155 |
|
ETX20L |
310 |
17.5 |
15.5 |
7.0 |
6 -7/8 |
177 |
3 -7/16 |
88 |
6- 1/8 |
155 |
|
ETX30L |
400 |
26 |
21.50 |
9.8 |
6 -5/8 |
168 |
5 -3/16 |
131 |
6 -7/8 |
175 |
|
|
|
Dry & Fresh Pack Deka Batteries
|
|
Part No. |
CCA
AH
(10 HR) |
Dimention (MM)(+-2MM) |
Weight
W/O
Acid |
Term
Type
(SEEPG.6) |
Acid
volume
LITER) |
REG
CHARGE
CURRENT
(AMP) |
CCA
@0.F
(-18°c) |
|
L |
W |
H |
(L.B.S) |
KG |
|
LOW MAINTENANCE/HIGH PERFORMANCE DRY OPTION 1-12 VOLT continued |
|
YB30L-B |
30 |
168 |
132 |
176 |
14.1 |
6.395 |
4 |
57.5 |
3.0 |
- |
|
YB16CL-B |
19 |
175 |
100 |
175 |
10.1 |
4.590 |
5 |
40.6 |
1.9 |
- |
|
YTX12-BS |
10 |
150 |
87 |
130 |
7.5 |
3.400 |
5 |
0.60 |
1.2 |
180 |
|
YTX9-BS |
8 |
150 |
87 |
105 |
5.4 |
2.450 |
5 |
0.40 |
0.9 |
120 |
|
YTX5L-BS |
4 |
114 |
71 |
106 |
3.5 |
1.590 |
5 |
0.24 |
0.5 |
70 |
|
BATTERY ISOLATORS |
|
Enhances your alternator performance for efficient charging, maximum power, longer battery life, and safer operation.
- Protects main startin battery from auxiliary drain
- Regulates current for multi-battery system
- Ideal for automotive, marine, and RV applications.
|
• Without an isolator.
:- In a multi-battery system, the battery with the lower state of charge will drain power
from the battery with the higher state of charge.
• The benefits of using an isolator.
:- The battery isolator protects your starting battery power so that no matter how weak
your accessory battery becomes, the accessory battery will never drain power from
the starting battery.
• Additional benefits of using an isolator.
:- The battery isolator also saves time by allowing simultaneous charging of both
batteries.The amount of current flowing into each battery is determined by its state of charge,
which guarantees that each battery will get fully charged, prolonging its life.
|
|
Part No.
|
Description |
Weight
|
|
EP08770 |
Isolator 95 Amp |
2lbs. |
|
EP08771 |
Isolator 120 Amp |
3lbs. |
|
|
Battery Accessories
Battery Box (27Series)
Size: 13-7/8 in.Lx7-1/4 in. Wx10-1/2 in H
|
Battery Box (24Series)
Size: 11-1/8 in.Lx7-3/4 in. Wx10-1/8 in H
|
|
Battery Trays
Size: 283mm Lx197 Wx257mm H (042215)
Size: 341mm Lx184 Wx267mm H (042216)
|
30 Amp 240 Volt Molded Cordset - 50'
|
|
Lead Battery Terminals
|
Heavy Duty Lugs Tin-plated
|
|