Al-Sabih Marine Equipment is one of the Largest companies in Kuwait and The Middle East offering more than 12850 items from over 147 manufactuers
             

Contact Us

Tel: (+965) 24835228
           (+965) 24835209
Fax:   (+965) 24819672
WhatsApp:     99270105
E-Mail: alsabihmarine@yahoo.com


   

| |
Windlass and Accessories
For more information Click Here
 

 

سلسله أو حبل

RC10 Windlass

RC10 with Capstan
Maxwells all new RC10 series windlass proudly Follow in the highly successful footsteps of the Freedom, Liberty and HRC fully automatic rope/ Chain anchor winches.
المواصفات الاساسيه
• ملف ثنائى الأتجاه
• قاطع كهربائى
• مفتاح سحب وتنزيل
• ذراع احتياط للأستعمال اليدوى
• استخدام كامل للسلسلة أو مع حبل
• عداد قياس طول السلسله مع تنزيل وسحب
• مفتاح تنزيل للقدم
• عداد قياس للحبل
Model RC10 (8mm) RC10 (10mm) RC12 (13mm) الموديل
Max Pull 700kg (1540lbs) 850kg (1870lbs) 1590kg (3500lbs) حمولة السحب
Static Hold 1500kg (3300lbs) 1500kg (3300lbs) 2200kg (4840lbs)
Chain Short Link 8mm 10mm 12mm/13mm قياس السلسله
Chain Speed
(Normal Working)
24m/min - 79ft/min 24m/min - 79ft/min 15m/min-50ft/min سرعة سحب السلسله بالدقيقة
Rope Speed
(Normal Working)
20m/min - 65ft/min 20m/min - 65ft/min 13m/min-43ft/min سرعة سحب الحبل بالدقيقة
Rope Size
(3 stand or 8 plait)
14mm - 16mm 16mm 20mm نوع وحجم الحبل
Power Supply (DC) 12v or 24v 12v or 24v 24V الفولت
Net Weight 19kg (42lbs) 20kg (44lbs) 32kg (71lbs) الوزن
Motor (Watts) 1000w 1200w 1200w قوة المحرك

 

 

 




ونش عامودي حبل فقط
* An extremely versatile vertical capstan or general purpose electric winch for use as an anchor winch, pot hauler or davit winch.
* The ANCHORMAX™ has an extremely high power to weight ratio. The compact, fully sealed gearbox is driven by a vertically mounted, permanent magnet motor
* Intrusion below decks is minimised making the design ideal for boats from 5m (16ft) to 10m (32ft).
* Fitting to the boat is simplicity itself because no dismantling of the winch is required. The ANCHORMAX™ is manufactured in marine grade anodised aluminum body and chromed bronze drum.
Note: The ANCHORMAX™ should not be used to haul halyards
Note: The ANCHORMAX™ is not recommended for hauling chain.

قوي اقتصادي
سهل التركيب
شكل مناسب لجميع القوارب

Specifications المواصفات
Max line Pull 386kg قوة وزن السحب القصوى
Speed 24m/min السرعه
Voltage 12v الفولت
Power 500w قوة المحرك
Weight 8kg وزن الونش




VC 1000
ونش عامودي حبل فقط
Vertical design suits smaller powerboats or sailboats and can be utilised for anchor rodes, as a docking capstan on larger craft, or auxiliary line hauling.
* High quality finish on above deck components, hard wearing chrome over marine-grade bronze
* Heavy duty, dual direction motors, designed for marine winches.
Easil disassembled for sevicing.

• ونش للحبل
• محرك قوى 1000 واط
• سريع جداً
• مفتاح للقدم


Specifications المواصفات
Max Pull 455kg حمولة السحب
Line speed 20m/min السرعة بالدقيقه
Power Supply 12 or 24v الفولت
Net Weight 18kg الوزن
Motor (Watts) 1000w قوة المحرك
Hydraulic Pressure 100bar الضغط

Vertical Rope/Chain Series RC6


بإمكانك أن تستعمل حبل فقط أو سلسله فقط أو سلسله مع حبل

متوفر بثلاث قياسات تناسب جميع الأحجام

*The all new stainless RC6 Series untilises 6mm/7mm(1/4')
chain spliced to 12mm (1/2') three strand or 8-brait (plait)rope.
*The RC6 featrues Maxwells revolutionary, and patented
new wave designi chainwheel refer below for more information.
*RC6 has been designed with the smaller trailer boat market mind.
*The in-line vertical gearbox and motor means quick and easy installation by either the boat yard or the DIY aftermarket customer.
*An inexpensive high performance and great looking windlass the RC6 is built for durability and years of trouble free use.
*The RC6 is low profile unit (no optional capstan drum).



Model RC6 6mm/7mm الموديل
Max Pull 350kg (770lbs) حمولة السحب
Chain short link 6/7mm قياس السلسله
Chain Speed
(Anchor Retrieval)
24m/min - 79ft/min سرعة سحب السلسله بالدقيقة
Rope Speed
(Anchor Retrieval)
21m/min - 69ft/min سرعة سحب الحبل بالدقيقة
Rope Size
(3 stand or 8 pliat)
12mm - 1/12" نوع وحجم الحبل
Power Supply (DC) 12v or 24v الفولت
Net Weight 8.5kg (18.7lbs) الوزن
Motor (Watts) 500w قوة المحرك

Vertical Rope/Chain Series RC8-8


*The all new stainless steel RC8-6 fully automatic rope chain widlass is designed to effortlessly retrive and deploy 6mm/7mm (1/4') chain spliced to 12mm (1/2') three strand or 8-Plait rope.
*The larger stainless steel RC-8-8 can be used with 8mm (5/6') chain spliced 14mm (9/16') three stand or 8-brait (plait)rope.
*The ingeniously designed rope/chain gypsy (chainwheel) is able to accommodate wide range of chain pitch difference within the specified chain size diameters suitable for use with the RC8.
*Sleek Low profile and MaX-grip capstan drum versions are available to suit individual user preference.
*Simple two piece installation saves time and money and allows easy retrofitting without disassembly of the windlass.


Model RC8 (6mm/7mm) RC8 (8mm) الموديل
Max Pull 350kg (770lbs) 600kg (1320lbs) حمولة السحب
Chain short link 6mm/7mm 8mm قياس السلسله
Chain Speed
(Anchor Retrieval)
28m/min - 92ft/min 32m/min -105ft/min سرعة سحب السلسله بالدقيقة
Rope Speed
(Anchor Retrieval)
24m/min - 79ft/min 28m/min - 92ft/min سرعة سحب الحبل بالدقيقة
Rope Size
(3 stand or 8 pliat)
12mm - 1/2" 14-16mm-9/16"-5/8" نوع وحجم الحبل
Power Supply (DC) 12v or 24v 12v or 24v الفولت
Net Weight 12.5kg (27.5lbs) 16.5kg (36.3lbs) الوزن
Motor (Watts) 600w 1000w قوة المحرك

الكفاله : يشترط أن يتم التركيب , الصيانه أو التصليح من قبل شركتنا أو من قبل فنيين متخصصين وبأشراف من شركتنا وإلا تعتبر الكفاله لاغيه
احتمال تغير فى المواصفات بدون اشعار مسبق
الرجاء الالتزام بكتيب التعليمات المرفق

HRC10-10 Horizontal Rope/Chain Series




* Maxwells all new HRC10 Horizontal Series represents yet another breakthrough in performance and anchor handling excellence. These horizontal, fully automatic rope/chain windlasses have been designed to meet the demands for use on larger vessels up to 16 metres (52 feet), which require a completely above deck installation system. The HRC10’s flawlessly handle rope up to 16mm (5/8") and chain up to 10mm (3/8") in size, including the thick rope to chain splice.
* The unique Maxwell wrap around™ horizontal chainwheel ensures that more than 90° of the wheel is used, allowing greatly improved rope and chain handling compared with competitor designs. The HRC10 works just as effectively with all-chain rodes for those who desire the added security and holding power of an all-chain anchor system.



SPECIFICATIONS
Model Max Pull Chain short link Rope Size
(3st. or 8plt)
Chain Speed Rope Speed Power(DC) Net Weight (Electric) Motor (Watts)
HRC10-10mm 850kg (1870lbs) 10mm (3/8") 16mm - 5/8" 24m/min - 79ft/min 20m/min - 66ft/min 24v 20kg (44lbs) 1200w

HWC 3500 Horizontal Windlass and chain Pipe




* The HWC Series is designed for automatic horizontal handling of chain only anchor rodes while offering an independent capstan for the retrieval of a secondary rope and chain rode or to assist with docking procedures.
* Fully automatic single or dual direction chainwheel operation, for use with chain only rodes. * Functional rope hauling from fore and aft using independent MAX-grip™ snag-free warping drum with clutch disengagement of chainwheel for positive control of all ropes. * Optional dual anchor handling with smooth independent control of each chainwheel via cone clutches. * Chain pipe assembly supplied. * Cone-type clutch/brake mechanism permits manual ‘free fall’ anchoring. Cone clutches, unlike dog clutches, provide smooth progressive engagement ensuring safe and precise operator control.
* Chainwheel locking pawl to assist when using warping drum independently. * Simple deck mounted installation with no under deck parts. * Simplified maintenance with ability to strip the running gear (chainwheel and drum) from the windlass without disturbing the windlass mounting. * Heavy duty, dual direction motor, designed for marine winches.
SPECIFICATIONS
Model Max Pull Chain short link Static Hold Line Speed Power(DC) Net Weight (Electric) Motor (Watts)
HWC3500 1590kg (3500lbs) 10-13mm
(3/8" - 1/2")
2200kg
4840lbs
15m/min - 50ft/min 24v 57kg (125lbs) 1200w

 اكسسوارات وقطع الغيار

ملف ثنائى الإتجاه مفتاح قدم اصغر للونش اتجاه واحد مفتاح قدم اتجاه واحد ستيل-ابيض أو اسود عداد خاص لقياس عمق الباورة مع السحب والتنزيل  

مفتاح لرفع وإنزال المرساة مفتاح كبس تصعيد وتنزيل عامود ذراع االترس  مربط سلسلة بالمرساة قابله للدوران  

يدة ونش احتياطي محرك 1000 واط   قاعدة تجمع  محرك 600 واط  

اسطوانه عامود التركيب ذراع الضغط قطع للصيانه قاعدة الترس  

مسنن الترس ملف الحبل ملف السلسلة حلقة الترس  
© 2021. www.alsabihmarine.com, All rights reserved