Battery Isolator RCE+ 180 Ampere

RCE+ battery isolators allow simultaneous charging of 2 or 3 batteries from one alternator without connecting the batteries together.
Discharging the house battery for example will not result in discharging the starter battery.
The DC input power source may be an alternator, a charger, a wind turbine, a solar panel, a hydrogenator, etc.
The RCE+ battery isolators have a negligible voltage drop compared to conventional diode models which generate a drop of the order of 0.7VDC.
They can be used with any type of generator including electronic models, thanks to its special IG (Ignition = priming) terminal.
MOSFFET technology : The technology used, based on MOSFET transistors, ensures negligeable voltage drop between the inputs and the outputs. This is a major advantage
compared to a diode isolator.
Voltage drop free : Because there is no voltage drop due to RCE+ isolator, there is no need to increase the output voltage of the alternator.
Multi-voltage : The isolator works with 12VDC and 24VDC voltage, and also allows the use of LiFePO4 (Lithium) batteries.
IGNITION ready :  Some alternators need DC voltage on the + output to start charging. Inserting a battery isolator will prevent any return voltage from the battery and the
alternator will not start. The RCE+ splitters have an IG Input that will power the + output when switching on the engine.
Rated current : 180 Amp.
Number of inputs and Ø :  1 x M8.
Number of outputs and Ø :  3 x M8.
Dimensions (w x h x d) : 159  x 100 x 36 mm, (6,25 " x 3,93" x 1,41").